Accessories

Need any replacements or upgrade parts for your kit? For a more detailed exploded parts diagram - Click Here

BC NYLOC NUT M16 FOR I-44 FRONT
€6.34 €5.24

Delivery in 10 to 15 Working Days To United States
BC BR M52 LOWER COILOVER LOCKING COLLAR GOLD
€10.15 €8.39

In Stock - Delivery in 2 to 3 Working Days To United States
BC E-04-VN Front Plastic Bearing Ø48*10L
€8.88 €7.34

Delivery in 10 to 15 Working Days To United States
BC ER Coilover Extender 11cm Pair
€31.75 €26.24

Delivery in 10 to 15 Working Days To United States
BC ER Coilover Extender 20cm Pair
€31.75 €26.24

Delivery in 10 to 15 Working Days To United States
BC ER Coilover Extender 25cm Pair
€31.75 €26.24

Delivery in 10 to 15 Working Days To United States
BC Damper Boot McPherson To Suit M18 Damper Shaft
€10.15 €8.39

Delivery in 10 to 15 Working Days To United States
BC NYLOC NUT M12 X 1.25 13.4MM OVERALL LENGTH
€6.34 €5.24

Delivery in 10 to 15 Working Days To United States
BC V1 M44 LOWER COILOVER LOCKING COLLAR BLACK
€10.15 €8.39

Delivery in 10 to 15 Working Days To United States
BC STAINELSS CAMBER BOLTS 16MM THREAD
€0.64 €0.53

Delivery in 10 to 15 Working Days To United States
BC STAINELSS CAMBER BOLTS 22MM THREAD
€0.64 €0.53

Delivery in 10 to 15 Working Days To United States
BC STAINLESS CAMBER BOLT WASHER 10MM OUTER DIAMETER
€0.64 €0.53

In Stock - Delivery in 4 to 5 Working Days To United States
BC STAINLESS CAMBER BOLT WASHER 12MM OUTER DIAMETER
€0.64 €0.53

In Stock - Delivery in 2 to 3 Working Days To United States
BC STAINLESS CAMBER BOLT WASHER 13MM OUTER DIAMETER
€0.64 €0.53

In Stock - Delivery in 4 to 5 Working Days To United States
BC TOP MOUNT CENTRAL NUT M14 X 1.5 15MM OVERALL LENGTH
€6.34 €5.24

Delivery in 10 to 15 Working Days To United States
BC I-11 I-03 FRONT DAMPER ADJUSTER KNOB 30MM DROP IN
€8.88 €7.34

Delivery in 10 to 15 Working Days To United States
BC NYLOC NUT M10 X 1.25 16MM OVERALL LENGTH
€6.34 €5.24

In Stock - Delivery in 2 to 3 Working Days To United States
BC TOP MOUNT CENTRAL NUT M12 X 1.25 13.4MM OVERALL LENGTH
€6.34 €5.24

In Stock - Delivery in 4 to 5 Working Days To United States
BC DAMPER ADJUSTER KNOB 40MM OL DROP IN
€8.88 €7.34

In Stock - Delivery in 4 to 5 Working Days To United States
BC Damper Boot Rear To suit M14 Damper Shaft
€10.15 €8.39

In Stock - Delivery in 4 to 5 Working Days To United States
BC TOP MOUNT CENTRAL NUT M12 X 1.25 28MM OVERALL LENGTH I-01-BR-RA
€6.34 €5.24

Delivery in 10 to 15 Working Days To United States
BC Top Mount Stud M8 x 1.25 25mm Overall Length I-03 ONLY
€2.53 €2.09

Delivery in 10 to 15 Working Days To United States
BC Coilover Spring Seat Insulator 62mm internal diameter
€2.54 €2.10

In Stock - Delivery in 2 to 3 Working Days To United States
BC BR Coilover Extender 25cm Pair
€31.75 €26.24

In Stock - Delivery in 2 to 3 Working Days To United States

Before you can continue, you must agree to all of following terms

This true rear coilover option requires shell reinforcement prior to coilover install. Please tick to confirm you understand the conditions of use.

I agree to the true rear coilover terms and conditions

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RN kit will not come with any top mounts as it is designed specifically to re-use the OEM top mount components.

I agree to the noise transmission terms and conditions

We have had a small number of instances where the pillowball top mounts cause noise transmission on this specific application. If the potential noise could be an issue for you, we advise purchasing the ‘recommended kit’ at the top of this page instead. The recommended BR-RS kit will come with non camber adjustable rubber top mounts which will eradicate the issue.

I agree to the noise transmission terms and conditions

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on this application. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any of these kits as faulty due noise transmission. This does not effect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

In a very small number of applications the RA front solid pillowball suspension top mounts can transmit noise into the cabin. It is very rare and is application specific. Customer can expect noise transmission on the 996 and 986 kits. The noise is not indicative of a fault with the product, its the nature of a solid pillowball top mount and the nuances of a very small number of car shells that combine to generate noise transmission. The noise is in the form of light knocking. As noise transmission is a function of the pillowball and shell combination and you accept that noise might be present we will not accept returns of any 996 or 986 kits as faulty due noise transmission. This does not affect the kits general warranty, only that pillowball noise transmission is not a warranty issue. We will not accept kit returns due to noise transmission.

I agree to the noise transmission terms and conditions

Additional plug-in error delete kit may be necessary. Please note that this is not available for purchase through BC Racing.

I agree to the terms and conditions

The RM Series is comprised of a damper cartridge secured within a threaded outer body. This specific design requires a lubricating grease to be applied during the assembly process between the two damper and threaded body to avoid metal to metal contact. In order to keep the two components from touching each other and so generating noise transmission you will need to periodically clean out the old grease and apply new grease.

This is a simple process that can be done with just a few common tools. It does not require you to open the internals of the dampers themselves and therefore you do not need to have the dampers re-pressurised after carrying out this procedure. Please contact us on [email protected] for more information and a step-by-step guide on how to complete this maintenance.

As a result of this required maintenance, we do not recommend the RM Series for road use over the BR Series or ER Series.

I agree to the terms and conditions

Filter Options

Click here for ASP (Adjustable Spring Platform) options